RZ5-2500DSPB | 2500W Class D 5 Channel Amplifier
RAZOR Series 5 Channel Amplifier w/ Built-in DSP – Download Smartphone App to Tune in Real-Time
Max Power | 2,500 Watts |
---|---|
RMS Bridged @ 4Ω | 300W x 2 + 600W (2Ω) |
RMS Power @ 2Ω | 150W x 4 + 600W |
RMS Power @ 4Ω | 100W x 4 + 400W |
Power Acoustik RZ5-2500DSPB: 5-Channel DSP Amplifier With 2500 Watts of Precision Audio Control
Designed for audio enthusiasts who demand total control and reliable power, the Power Acoustik RZ5‑2500DSPB combines a high-powered 5-channel Class D amplifier with integrated DSP tuning—providing clarity, customization, and power in one sleek chassis.
This amp doesn’t just drive speakers; it commands an audio system. With 2,500 watts of peak output, the RZ5‑2500DSPB delivers clean, controlled sound to your full-range drivers and subwoofers simultaneously. Whether you're running a factory head unit or an aftermarket source, the amp’s Automatic Hi-Level Signal Sensing Turn-On ensures seamless installation—no remote wire needed.
Integrated DSP With PC & Mobile Tuning Support
At the heart of this model is its Digital Sound Processor, which gives you full access to time alignment, crossover slopes, bass restoration, and a 10-band graphic EQ—perfect for refining each zone of your soundstage. Fine-tune every channel through USB PC software or the Power Acoustik DSP mobile app (compatible with Android and iOS), offering a visual interface for live adjustments.
Built for Control and Clarity
- Full-range Class D topology ensures high-efficiency power with minimal heat
- Dedicated subwoofer channel with independent crossover and gain controls
- Bluetooth tuning capability for real-time configuration via smartphone
- 4-volt RCA outputs and signal-sensing input designed for modern and OEM head units
Rugged Design Meets Intelligent Audio
The compact Razor series heat sink fits tight installs without sacrificing output. Inside, surface-mount componentry ensures vibration resistance, while MOSFET power supplies deliver consistent voltage to all five channels.
Perfect for powering an entire vehicle setup, the RZ5-2500DSPB serves as both amplifier and signal processor, allowing audiophiles, installers, and everyday drivers to extract detailed performance from any system—from stock door speakers to aftermarket subwoofers.
Razor DSP Features:
Integrated 100dB Dynamic Range, -80dB THD+N ADC
Integrated 104dB Dynamic Range, -90dB THD+N DAC
User Friendly SigmaStudioTM User Interface w/ Response Display
30V MAX 4-ch High Level & 4V MAX RCA Input Voltage
2ch. RCA output for Subwoofer Amplifier Integration
Optional High-Level Input from Hands-Free Bluetooth Module
Optional Independent Input or Channel Mixing/Summing
Up to +6dB / -60dB Master Input Level
Up to -60dB Independent Channel Level Cut
Up to 20ms Independent Channel Delay, 0.05ms Increments
Independent Channel 0/180 Phase Control
Independent Channel High, Low or Bandpass Crossover
Independent Channel 6dB-48dB/Octave Crossover Slope
Variable Frequency Crossover Setting, 20Hz-20kHz
10-Band Graphic Equalizer for Each Channel
20dB Boost/Cut for Each Band
Variable Independent Band Q Adjustment, 0.4-9.6
General Features:
High-Efficiency Class D Full Range
Compact 4.75” Chassis Design for Installation Versatility
Dimensions (1.625″H x 4.75″W x 12.25″L)
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
2-ohm Stereo & 4-ohm Bridged Full Range Operation
Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
200mV-6V Low-Level RCA Inputs
8ga Power Wire & 12ga Speaker Wire Outputs
High-Level Input w/ Signal Sense Auto Turn-on
12dB Bass Boost Increases Low Octave Harmonics
DSP Software Download: